Side
entry mixer is an efficient converter of mechanical energy in a fluid motion.
Side entry mixers are more efficient than top entry mixers. For large-diameter
tanks, it is significantly cheaper Side entry mixer is ideal for use in
floating roof tanks. When practical considerations prevent the use of top entry
mixers.
Application
of Side Entry Mixers
Crude
Oil Bottom Sludge & Water Pocket Control: - To
control or prevent bottom accumulation Sludge and water pocket (BS & W)
Polishing requires high-speed circulation Keep the bottom of the tank
completely Heavy solids, water, corrosive salts in suspension.
Maintain
Homogeneity: - Finished or to maintain refinery homogeneity
Intermediate products or chemistry. This requires a complete movement of the
entire tank. "Turnover" from top to bottom and circulation around the
tank, Make sure the product is at the top, center, and bottom Remain uniform
Specification. This may also apply to crude oil direct storage in refinery
tanks in particular Distillation unit.
Blend:
- To get a mixture of two or more different components a specific
homogeneous blend at a specific time Requirements.
Heat
Transfer: - To support heat transfer during heating or cooling,
or Maintains temperature uniformity and complete fluid Motion.
Combined
Duties: - One or more jobs may apply Specific applications
and most important obligations. You need to decide on the choice of mixer.
Typically, the duty that requires the most power is a blend.
Types
of Side Entry Mixer
Fixed
Angle: - Used and maintained in blending applications helps
with uniformity and heat transfer. All these The application requests full
top-to-bottom sales For this purpose, the mixer is permanently installed At an angle
of 10 ° to the left of the tank axis.
Swivel
Angle: - The swivel angle mixer inlet angle varies up to 30 °
on either side. The centerline of the tank is activated in 10 ° increments tank
floor washed directly by impeller flow. This is the only satisfactory solution
for BS & W control. Large tanks and heavy solids, with water corrosive
salt. A permanently fixed mixer is maintained by the suspension of the mixer
module is supported by two hinge bearings Makes it easy to change the angle
manually. A side-entry mixer with swivel capability can change the shaft angle
by 15 degrees on either side of the mixer, allowing the tank floor to be scored
directly by the high flow generated by the impeller. Turn with motor & hard
& solid swivel ball. The mixer angle can be changed manually or with an
automatic swivel actuator. Side entry mixer with geared motor single or double
(cartridge type) mechanical seal depending on application and process
requirements. The shut-off device gives you the flexibility to change the
mechanical seal without emptying the tank. A large tank with multiple side entry
mixers for liquid mixing and solid suspension.
Interested? You can call us +91-9923133933 and contact us on galaxyprosys@gmail.com and also visit us for more details www.galaxyprocess.in
