Standard Design Features of the Side Entry Mixer

All Galaxy Side Entry mixer's are:

The highly efficient spiral impeller with true helical pitching and swinging was developed by Galaxy process for side entry mixer. Several years of research on fluid dynamics have been rewarded with a technically advanced turbine design with a large blade area offering optimal cavitation-free priming conditions favoring maximum pumping rate and transfer for any installed power. Each impeller is precision molded as a one-piece component, eliminating adjustment variations and welding problems commonly associated with alternative designs. Rigid equality and balance checks guarantee minimal vibration and pump performance.

Advanced Impeller design

• High pumps
• High thrust
• Minimal energy consumption
• No cavitation
• Solid reliability

Impeller Mounting

Thanks to the use of cone, side key and fixing bolts, a positive fixation and a drive of the wheel on the shaft are realized.

Bearings

In any case, the units are designed and manufactured to require minimal maintenance. In particular, mixed storage facilities are designed to last a long time.

Gear Mixer

The bearings of the gear units are all open in the cage, including the support bearings of the drive sprockets. All of these bearings are spray oil mists lubricated by lubrication passages in the transmission housing.

Belt mixer

The bearings of the belt-driven units are all pre-filled with grease and "sealed for life", such that. Does not require relubrication. Bearing life is based on the fact that 90% of a large group of identical bearings can reach or exceed the expected life. This is called basic life and meets ANSI and ISO standards. The majority of bearings have a much longer life. the average life is about five times the calculated base life.

Shaft

The shaft has been designed to minimize misalignment, deflection and vibrations that affect the service life of the mechanical seal and bearing. Monobloc component without intermediate connections, it is rectified between the centers of the rolling and joint areas. All shafts are chrome-plated in the sealing and closing zones. The Galaxy Industrial Equipment's has been designed for high performance operation and the large shaft diameter has a critical speed of at least 250% of operating speed. The shaft is supported by high performance bearings on the outside of the tank product, which facilitates maintenance and monitors performance.

Galaxy Industrial Equipment is one of the leading side entry mixer manufacturer in India.